10
Before use
Part names and
functions
Connections
Installing and setting up
supplied software
USB settings
Troubleshooting Index
Specifications
Signal system chart
Basic
operations
Basic operation
Turning the power on
Connected to this unit and a PC with a USB cable.
Top panel lights, and the power switches on.
Turning the power off
Unplug the USB cable.
Top panel goes out, and the power switches off.
NOTE
There is no function on this device for automatically switching off the
power supply when the unit is not used for a prolonged period.
If you do not intend to use this device for a prolonged period, for
safety remove the USB cable from the PC.
Basic operation
Microphone input
Adjusting the microphone input level
Before turning the power on, make sure that your microphone plug is
already inserted in the Balanced microphone input terminal.
Turn MIC LEVEL.
Line input
Adjusting the line input level
Before turning the power on, m
ake sure that your external devices are
already inserted in the Line input terminal and Master output terminal.
Turn AUX IN LEVEL.
Headphone monitor
Before turning the power on, m
ake sure that your headphone plug is
already inserted in the Headphone jack.
Turn AUX IN MONITOR LEVEL.
NOTE
•When using headphones, be careful not to turn the volume too high.
•Microphone input sound is not output from the headphone jack.
This section describes operations of the unit without using the DJ software.
•For information about how to operate the DJ software, see the instruction manual for the DJ software or the help menu.
•For information about the buttons on the unit for operating the DJ software and their functions, see 17 – 19 pages.
Front panel
Rear panel
Headphone jack
USB terminal
Line input monitor level adjustment knob
Line input level adjustment knob
Line input terminal
Microphone input level adjustment knob
Balanced microphone input terminal
Master output terminal
To Next Page
Loading...
Need help?
General
