Denon MC2000 User Manual

17
Before use Connections
Basic
operations
Installing and setting up
supplied software
USB settings
Troubleshooting Index
Specifications
Signal system chart
Part names and
functions
ThetoppanelisexplainedforSERATODJINTRO.OperationsofthetoppanelonlyoperatetheDJsoftwareanddonotcontrolaudioinput/output.
For buttons not explained here, see the page indicated in parentheses ( ).
Part names and functions
Top panel
q Effects adjustment knob (1/2/3)
Adjusts the effect balance.
w Beats select/Sample volume knob
Turn the knob to select the effect beats, and
press the knob to set beats manually.
Turn the beats select knob:
Selects the effect beats.
Press the beats select knob:
Press the knob repeatedly, and the BPM value is
measured as the interval between presses.
•Hold down W7 SHIFT and turn this knob to
control sample volume.
•Hold down this knob more than 1 second to
restore the beat.
e Effects ON/OFF switch button (1/2/3)
SwitchestheeffectsON/OFF.
r Auto loop/exit and loop size adjustment
buttons
(AUTO LOOP/EXIT –/+)
•AUTO LOOP/EXITswitchesautoloopON/OFF.
•Use –/+toadjusttheloopsize.
t Loop point setting button (IN/OUT)
Sets the loop in point and loop out point.
•Press this button during loop playback to fine
adjust the loop point.
y PAN adjustment knob (MONITOR PAN)
Adjusts the balance between the cue output
from the headphones and master volume.
u Hot cue button (1/2/3/4)
The following operations differ depending on
whether o SAMPLE MODE are ON or OFF.
•OFF: Sets CUE 1 – 4 points or cue playback.
•Hold down W7 SHIFT and press this button to
delete each of the cue point settings.
•ON：Plays back the sample slot. If the sample
is currently being played, playback is started
again from the start of the sample.
•Hold down W7 SHIFT and press this button to
stop playing the sample slot.
Q3 Q4 Q6 Q9Q8Q5
W8
W7
W6
W4
W1
W3
W2
W5
W0
Q7
q
w
e
y
i
o
Q2
Q0
Q1
u
t
r
i Headphone output volume adjustment knob
(MONITOR PHONES)
Adjusts the volume output to the headphones.
o Sample mode switching button
(SAMPLE MODE)
OFF: Switches to the hot cue mode.
HOT CUE 1 – 4 are used to operate the hot cues.
ON: Switches to the sample mode.
HOT CUE 1 – 4 are used to operate the sample
player.
Q0 Key lock button (KEY LOCK)
With this ON, the key does not change even if
you adjust the tempo during playback.
•Hold down W7 SHIFT and press this button to
change the key adjustment range.
Q1 Jog wheel ···················································· (11)
Performs the search operation or bend operation.
•Hold down W7 SHIFT and press this button to
fast search.
Q2 Pitch fader slider
Adjusts the playback pitch.
•Move the knob toward the “–” direction to
slow down the pitch and the “+” direction to
speed up the pitch.
Q3 Beat sync button (SYNC)
Performs auto beat matching.
•Hold W7 SHIFT and press this button to exit the
beat matching.

Denon MC2000 Specifications

General

Brand	Denon
Model	MC2000
Type	DJ Controller
Channels	2
Crossfader	Yes
Software	Serato DJ Intro
MIDI	Yes
Inputs	1/4"
Outputs	RCA, 1/4"
Audio Interface	Yes
Software Compatibility	Serato DJ, Virtual DJ