Denon PMA-2500NE - Bottom Cover; DIGITAL and DAC PCB

3. BOTTOM COVER
Proceeding : TOP COVER and SIDE PANEL
→
BOTTOM COVER
(1) Cut the wire clamp, then remove the screws.
4. DIGITAL and DAC PCB
Proceeding : TOP COVER and SIDE PANEL
→
BOTTOM COVER
→
DIGITAL and DAC PCB
(1) Remove the screws. Remove the STYLE PIN. Remove the connector.
↓Shooting direction: C↓
View from the bottom
x27
CUT
View from the bottom
↑Shooting direction: A↑
x5
x4
x4
N403
N109
N103 N201
N110
N106
N111
N102
N101
N108
N202 N203
STYLE PIN
15