Denon PMA-2500NE - FIRMWARE UPDATE PROCEDURE; Updating via USB-B

FIRMWARE UPDATE PROCEDURE
1. Updating via USB-B (U705)
1.1. Items to Be Prepared
(1) Personal Computer (Install "
Denon_DriverSetup_x.x.x
" V0.1.0 or later.
(2) USB cable (A type-B type).
1.2. Operations
(1) Connect the USB cable to the rear USB port and PC.
(2) Press the power button to turn on the power.
(3) Move the dedicated driver to the installed folder.
(If the installation location of the dedicated driver has not been changed, it is stored in
"
C:\Program Files\Denon\Denon_USB_Driver
".)
(4) Rename the binary le for USB update as shown below.
ModelName_DFU_MX25L4006E.bin
(Ex.) PMA2500NE_DFU_MX25L4006E.bin (Do not include a hyphen in the model name.)
(5) Start "
DenonUSBAudioDfu.exe
".
(6) Click "
Start
".
If the error message below is displayed, close the application and check that the renamed le name is correct.
C:¥Program Files¥Denon¥Denon_USB_Driver¥XXXXXXX_DFU_MX25L4006E.bin
(6)ーー→
XXX-XXXX
C:¥Program Files¥Denon¥Denon_USB_Driver¥XXXXXXX_DFU_MX25L4006E.bin
23