Selecting the input source
1
Press the input source select button to be played back.
The desired input source can be selected directly.
0
You can also select the input source by pressing q on the main unit.
0
Press TUNER again while the source is set to “TUNER” to switch between FM/AM
band.
Adjusting the volume
1
Use VOLUME df to adjust the volume.
The volume level is displayed.
0
You can also adjust the volume by turning VOLUME on the main unit.
Turning off the sound temporarily
(Muting)
1
Press MUTE :.
“MUTE ON” is displayed.
0
To cancel mute, either adjust the sound volume or press MUTE : again.
Contents Connections Playback Settings Tips Appendix
26
Front panel Display Rear panel Remote Index
To Next Page
Loading...
