1-9. Initialize
Initializes all MCU and network module backup data.
NOTE : If initialization is executed in LEGO Off mode, cancel LEGO off mode then reset the LEGO Net-
work.
1-7.1. Starting up
Insert the AC plug while pressing button "
POWER
", and wait for more than 3 seconds.
Release the "
POWER
" button when the Power indicator turns orange and the Eject indicator turns
white.
Select the "
Initialize
" using the "
CURSOR
f
/
d
" button, then press the "
ENTER
" button to conrm.
"
Initialized
" is shown on the display for 5 seconds.
"
Initialized
" is displayed and the power turns off after 90 seconds.
(The network device is started and initialized during this time.)
1-7.2. Initialization item
Network module backup data
(1) Network setup
(2) Friendly Name
(3) Auto Update setting
(4) Allow Update setting
(5) Time Zone setting
(6) Queue list
(7) Internet Radio recently played station
(8) Quick Select playback station
(9) AirPlay Password
(10) Bluetooth Pairing History
(11) Crestron Connected Setup
MCU backup data
Items Default
(1) Source Internet Radio
(2) Dimmer 100%
(3) Sleep Off
(4) Repeat / Random / Program Off
(5) Setup Menu items Clear all
(6) Volume 10
(7) (Disc / Folder) Mode Disc mode
(8) Tuner preset list Clear all
(9) Last Band FM
(10) Last Digital In Optical In 1
(11) SDB Off
(12) Bass 0
(13) Treble 0
(14) Balance Center
(15) Source Direct Off
Before Servicing
This Unit
Electrical Mechanical Repair Information Updating
66