Denso BHT-904B - Page 159

145
Barcode Handy Terminal
 If the System Update File Does not Exist when Updating the CU-911 System
Dow
nload the CU-911 system update file and update the CU-911 system
.
 If t on the CU-911 when Up
ys as shown on the right if the BHT has not been set on
th
et the BHT on the CU-911 and try again.
en displays as shown on the right if the CU-911 system update
ils.
y
gain.
ress the Ba
ckspace/clear key to return to the CU-F/W MODIFY menu.
The screen displays as shown on the right if the system update file does
not ex
i
st when updating the CU-911 system.
again.
Press the Backspace/clear key to return to the CU-F/W MODIFY menu
the BHT Has not been Se dating the CU-911 System
The screen displa
e CU-911 when updating the CU-911 system.
S
Press the Backspace/clear key to return to the CU-F/W MODIFY menu.
 If the CU-911 System Update Fails
The scre
fa
Ensure that the BHT has been set properly on the CU-911 and then tr
a
P