Need help?Do you have a question about the Denver CAU-420 and is the answer not in the manual?
MP3/WMA Player Section| Signal to Noise Ratio | > 60 dB |
|---|---|
| Channel Separation | > 50 dB (1kHz) |
| Frequency Response | 20Hz - 20 kHz |
Tuner (FM)| Frequency Range | 87.5-108 MHz |
|---|---|
| Sensitivity | 2.8 µV |
| Stereo Separation | 30 dB |
| Signal to Noise Ratio | 50 dB |
| Channel Step | 50 kHz |
Line-Out| Output | 350 mV |
|---|---|
| Impedance | 10k Ohm |
Front AUX IN| Frequency Response | 20 Hz - 20 kHz |
|---|---|
| Sensitivity | 775 mV |
| Impedance | 20k Ohm |
General| Power Supply | 12V DC (10.8-15.6V allowable) |
|---|---|
| Speaker Impedance | 4 or 8 Ohm |
| Output Power | 40W x 4CH |
| Fuse | 10A |
Identifies and describes key controls like power, volume, function select, mode, and band buttons.
Details buttons for radio functions: AF, TA, PTY, tuning, scan, and presets.
Covers buttons for MP3/WMA playback, USB/SD card slots, and AUX input.
Advises on safe mounting locations, temperature, vibration, and panel removal for installation.
Provides diagrams and instructions for supporting the unit and connecting wires.
Explains how to replace the fuse and warns about using correct amperage.
Details power on/off, function selection for audio adjustments, and volume control.
Explains TA, AF, PTY functions, automatic/manual tuning, scan, and RDS information.
Covers storing and recalling preset stations and understanding the LCD display.
Guides on selecting program types for FM radio searches.
Details controls for pause, repeat, intro preview, random playback, and track searching.
Explains how to search for MP3/WMA files by track number or folder.
Lists technical specifications for MP3/WMA playback, AUX input, and general settings.
Details specifications for FM tuner performance and line-out output.
Provides guidelines for the proper disposal of electronic equipment.
To Next Page
