11. Configuration
- 22 -
date and time as you desire.
•
NTP Server
NTP is designed to synchronize a device's clock with a time server. Here
it shows the server being used for the tuner.
Language
You can choose other languages as preferred. Scroll with the ▲▼ buttons
on remote to the item with and press OK. Scroll to highlight and select
your choice of language by a press of OK button. Multipe languages are
available.
DAB set up
•
DAB full scan
You can always carry out a new scanning of DAB channels by selecting this
option. All current presets and channels will be erased.
•
DAB station status
This is to show the number of stations and signal received of each DAB
frequency.
•
DAB station list
The scanned DAB stations will be listed here for management. You can
move the position or even delete any station. Scroll to the station and press
[ ► ] button. A pop up window will be presented: Move up, Move down and
Delete.
FM Setup
•
Scan setting
Either "All stations" or "strong stations" (with stronger signal) can be
selected for the scan.
•
Audio setting
If the signal is weak and stable stereo reception is not possible, select
"Forced Mono" to get better reception.
•
FM full scan
You can always carry out a new scanning of FM channels by selecting this
option. All current presets and channels will be erased. The radio at the
lowest frequency of the scanned values will be highlighted. The preset list
will be saved unless a new preset scan is carried out.
•
FM station list
You can adjust the preset ranking by Move down, Move up or Delete it.
Highlight one of the preset and press the [ ► ] button, it will enter into the
Edit menu.
To Next Page
Loading...