11. Configuration
- 23 -
Always press the [ ◄ ] button to return to the Preset list.
Local Radio
The radio is set by default to detect the radio stations in your local area
automatically through internet connection and these stations can be
accessed in the "Local Radio" under Skytune menu. You can also set Local
in another region if you want. Highlight the Local Radio and press OK.
Choose Manual-set Local radio to change the region setting.
Playback Setup
This is to set the mode of playback under UPnP/DLNA compatible
streaming: Repeat All, Repeat Once or Shuffle.
Power-On Options
This is to select the state of the radio after a power reset / power cut, or the
next power up from Standby. There are 3 options available:
—
Go to Standby
—
Resume once ready: the radio will resume playing the last listened
station.
—
Ready to use: the radio will stay in Home screen without action.
Dimmer
You can set the backlight level for the display as you prefer.
There are two settings: Mode and Level
•
Mode ─ Normal or Power Saving
Normal ─ the display will stay with the same level of brightness all the time
without dim down.
Dim ─ the display will dim down after 20 seconds if no operation is made on
the radio.
•
Level ─ Bright and Dim
Bright ─ This is to adjust the level of brightness in Normal mode.
Dim ─ This is to adjust the level of brightness in Dim mode.
•
Dimmer in Standby
The highest backlight level in standby is set by system default. To further
reduce the backlight or turn it completely off, adjust it by pressing the ▼
button on remote. Increasing the backlight beyond the system level will
illuminate for 20 seconds and then dim to default setting automatically.
EQ(Equaliser)
Various music genres can be set.
Buffer Time
Sometimes you may experience uneven playback of the internet radio. This
To Next Page
Loading...