HD2000 IP User Manual
Copyright © 2015 SAS HENRI DEPAEPE Page 16 of 52
call is established, hang up to transfer the call.
NOTE: To transfer calls across SIP domains, SIP service providers must support transfer across
SIP domains.
7.4.4.
Conference Call
HD2000IP phone supports 3-way conference.
Assuming that call party A and B are in conversation. A wants to bring C in a conference:
A presses the “R” button to get a dial tone and put B on hold
A dials C’s number then “SEND” key to make the call
If C answers the call, then A presses “CONF” button to bring B, C in the conference.
If C does not answer the call, A can press R back to talk to B.
NOTE:
During the conference, if B or C drops the call, the remaining two parties can still talk.
However, if A the conference initiator hangs up, all calls will be terminated.
7.4.5.
Mute incoming calls
Press the Mute button to enable/disable muting the microphone.
7.4.6.
Voice Messages (Message Waiting Indicator)
A blinking red MWI (Message Waiting Indicator) indicates a message is waiting. Press the
MSG button to retrieve the message. An IVR (Interactive Voice Response) will prompt the user
through the process of message retrieval.
NOTE: Account requires a voicemail portal number to be configured in the “voicemail user id”
field.
To Next Page
Loading...