Depaepe Telecom HD2000 - Auto Provision

HD2000 IP User Manual
Copyright © 2015 SAS HENRI DEPAEPE Page 44 of 52
Management - Auto Provision
Options
Meaning
PnP Active
The request to the server to obtain a support URL for upgrade.
Upgrade Mode
Type of the provider : TFTP/HTTP/FTP/HTTPS
Firmware Server Path
needs to be set to be a valid URL of a provider server, server name
can be in either FQDN or IP address format. Below are examples of
some valid URLs.
e.g. firmware.mycompany.com:5688/Depaepe
e.g. www.mycompany.com:5688/fm/Depaepe
e.g. 218.2.83.110
By default address_ip_server_provider/fm
Config Server Path
needs to be set to be a valid URL of a provider server, server name
can be in either FQDN or IP address format. Below are examples of
some valid URLs.
e.g. firmware.mycompany.com:5688/Depaepe
e.g. www.mycompany.com:5688/cfg/Depaepe
e.g. 218.2.83.110
By default : address_ip_server_provider/cfg
Allow DHCP Option
Allow DHCP Option (128 or 150 or 66).
To Override Server
Auto Upgrade
Check for upgrade every
Check for upgrade every ? Minutes.
HTTP/FTP/HTTPS UserName
HTTP/FTP/HTTPS UserName
HTTP/FTP/HTTPS Password
HTTP/FTP/HTTPS Password.
Firmware/Config File Prefix
Firmware Prefix allows device to download the firmware name with
the matching Prefix.
Firmware/Config File Postfix
Firmware Postfix allows device to download the firmware name with
the matching Postfix.
Upgrade Check Mode
Authenticate Cfg File
Enable if Yes or disable if No Cfg File.
Set Common AES Key
The XML configuration file could be encrypted in AES-128-CBC
algorithm. The encryption password is defined in P8631
(Management->Auto Provision->Set Common AES Key ) of the
configuration file. The Password length is from 1-16, and password
must be[ 0-9,A-F].
Autoprovision Now