DERMAPEN HOME - Charging the Turbo-Cut Battery; Getting Started; App System Requirements

15 Dermapen HOME
TM
User Manual
7.4 - CHARGING THE TURBO-CUT BATTERY
Before charging the batteries, inspect the battery charger and
cable. Do NOT use the battery charger or cable if they are damaged
in any way.
1. Plug the USB charger into a suitable AC power adapter.
2. The charger displays a red LED while the battery is charging.
Once fully charged, a green LED will be displayed.
3. The battery takes approximately 2 hours to fully charge.
4. The supplied battery provides enough charge for 4 typical
treatments of 15 minutes duration each (total 1 hour).
5. If the battery charge drops below a threshold level, the
Dermapen HOME
TM
device will alert the user by flashing the
yellow status LED and battery indicator. The device will emit
an audible double-beep every 10 seconds.
6. If the battery is no longer capable of supplying sucient
power, the Dermapen HOME
TM
will provide a Critical Battery
Alert. The device will display a red status LED, display a
flashing battery symbol, emit three audible tones and power
o after 10 seconds.
During charging, keep the power cable away from hot surfaces.
8 - GETTING STARTED
To get started with Dermapen HOME
TM
, first register your device
with the Dermapen HOME
TM
Companion App. The App must be first
downloaded to a compatible smartphone or device.
8.1 - APP SYSTEM REQUIREMENTS
• iPhone/iPad with iOS 10/11 and Bluetooth functionality, or
• Android Phone with Android 6/7/8 and Bluetooth functionality