19 Dermapen HOME
TM
User Manual
8.8 - TO SYNC AND UPDATE DERMAPEN HOME
TM
1. Ensure Bluetooth is enabled on the smart device being used.
Ensure Dermapen HOME
TM
is turned o at this point.
2. Login to the app with the account email address and password.
3. The app should open on the products page, which will list the
available pens.
4. Find the required pen in the list (the serial number in the list
will match the serial number on the back of the pen under the
battery lid).
5. Turn the pen on ensuring it is in pairing mode.
6. Tap Connect and Sync.
7. The app will display Pen synchronising. Do not power o the
Dermapen HOME
TM
while updates are in progress. Interruptions
will require the device to be re-synced to resume normal use. It
is recommended to use the Power Adaptor during this process.
8. When the app displays Pen Successfully Updated, tap Done to
complete the syncing and updating process.
8.9 - DURING BLUETOOTH SYNCING/UPDATING
1. Dermapen HOME
TM
will display a blue Status LED, a Sync
Symbol, a Bluetooth Symbol, and the Speed Indicator Ring will
spiral to indicate updating is in progress.
2. Once successfully updated, the device is ready to be used.
3. If it has been more than 2 months since the last update of
the device, Dermapen HOME
TM
will remind you by emitting
an audible tone, displaying a Sync/Updating Symbol, and
displaying the time remaining to sync/update on the level
Indication Digits (in days, or in hours if less than 48 hours
remaining). Sync/Update the device or press the Primary
Button to continue operation.
4. Once the Sync/Update reminder period has elapsed,
the device will:
• Display an orange Status LED
• Display a pulsing Sync/Update Symbol
• Display ‘SYN’ on the Level Indication Digits
• Emit a double tone
To Next Page
Loading...