M
ove the lower hinge and upper plastic bushing to the opposite ends of the
Place the plastic filler caps in the screw holes that previously held the lower hinge
M
ove the locking pin by fitting it in hole on the opposite side of the frame
and nylon bushings as shown.
PIN
R
ove the lower hinge and upper plastic bushing to the opposite ends of the
Place the plastic filler caps in the screw holes that previously held the lower hinge
ove the locking pin by fitting it in hole on the opposite side of the frame
and nylon bushings as shown.
07/04/2015
30
ove the lower hinge and upper plastic bushing to the opposite ends of the
door.
Place the plastic filler caps in the screw holes that previously held the lower hinge
ove the locking pin by fitting it in hole on the opposite side of the frame
panel. Fit pins
RING
PIN
To Next Page
Loading...
