DEVICE REPAIR AND RETURN
The Open Path Eclipse IR Hydrocarbon Gas Detector is
not designed to be repaired in the field. If a problem
should develop, first carefully check for proper wiring,
programming and calibration. If it is determined that the
problem is caused by an electronic failure, the device
must be returned to the factory for repair.
Prior to returning devices or components, contact the
nearest local Detector Electronics office so that a
Service Order number can be assigned. A written
statement describing the malfunction must accompany
the returned device or component to expedite finding
the cause of the failure.
Return all equipment transportation prepaid to the facto-
ry in Minneapolis.
ORDERING INFORMATION
OPEN PATH ECLIPSE DETECTOR
When ordering, please specify:
3/4 inch threads, 0 to 5 LEL-meters, 4 to 20 mA or
M25 threads, 0 to 5 LEL-meters, 4 to 20 mA.
ALIGNMENT EQUIPMENT
Part Number Description
007726-001 Open path alignment kit consists of a
diode laser aiming apparatus and a
precision aligned laser holder.
007745-001 Optional alignment tool kit consists of
Rotational Pivot Lock (horizontal), Top
Pivot Lock (vertical), and Bottom Pivot
Lock (vertical).
SPARE PARTS
Calibration Magnet 102740-002
Silicone Free Grease 005003-001
O-Ring, 3.75” i.d., for wiring
compartment cover 107427-040
O-Ring, 3.25” i.d., for front
flange (internal) 107427-052
ASSISTANCE
For assistance in ordering a system to meet the needs
of a specific application, contact:
Detector Electronics Corporation
6901 West 110th Street
Minneapolis, Minnesota 55438 USA
Operator: (952) 941-5665 or (800) 765-FIRE
Customer Service: (952) 946-6491
Fax: (952) 829-8750
Web site: www.detronics.com
E-mail: detronics@detronics.com
20 95-85561.1
To Next Page
Loading...
