Detecto MedVue MV1 User Manual

8555-M512-O1 Rev E y MedVue MV1 Owner’s 37
CALIBRATION SETUP, CONT.
S
SERIAL PORT
With SERIAL PORT displayed, press the ENTER key. The display will change to RS232 MOdE.
Proceed to the RS232 MOdE (RS232 Port Output Mode) parameter.
Otherwise, press the ID/HEIGHT key to advance to the
USb PORT menu.
RS232 MOdE
(RS232 Port Output Mode)`
The display will show RS232 MOdE and the current setting. If the value displayed is
acceptable, press the ENTER key to save it. Otherwise use the numeric keys to enter a new
value, and then press the ENTER key to save it.
Allowable values are 0, 1, 2, or 3.
0 = RS232 Port Output Mode is Disabled
1 = RS232 Port Output Mode is set for Weight on Demand
2 = RS232 Port Output Mode is set for Continuous Data
3 = RS232 Port Output Mode is set for a Printer
bAud RATE
(Serial Output Baud Rate – Only if RS232 MOdE = 1, 2 or 3)
The display will show bAud RATE and the current setting. If the value displayed is
acceptable, press the ENTER key to save it. Otherwise use the numeric keys to enter a new
value, and then press the ENTER key to save it.
Allowable values are 1 through 9, and 0.
1 = 2400 Baud 4 = 14.4k Baud 7 = 38.4k Baud
2 = 4800 Baud 5 = 19.2k Baud 8 = 56k Baud
3 = 9600 Baud 6 = 28.8k Baud 9 = 57.6k Baud
0 = 115.2k Baud
PRINTER TYPE
(Set Type of Printer Output – Only if RS232 MOdE = 3)`
The display will show PRINTER TYPE and the current setting. If the value displayed is
acceptable, press the ENTER key to save it. Otherwise use the numeric keys to enter a new
value, and then press the ENTER key to save it.
Allowable values are 0, 1, 2, or 3.
0 = Print default ticket (P185 or other type of ASCII printer)
1 = Print journal line
2 = Print label (P220)
3 = Print nControl ticket (must have loaded a ticket format, otherwise will use
default ticket)
ENd OF PRINT
(End of Print Linefeeds – Only if RS232 MOdE = 3)
At the end of data sent to a printer, the MV1 can send a number of carriage return/line feeds
to space the paper in the printer to a desired position for withdrawal or for the next print.
The display will show End OF PRINT and the current setting. If the value displayed is
acceptable, press the ENTER key to save it. Otherwise use the numeric keys to enter a new
value, and then press the ENTER key to save it.
Allowable values are 0 through 9.

Detecto MedVue MV1 Specifications

General

Brand	Detecto
Model	MedVue MV1
Category	Accessories
Language	English