Devatec ElectroVap - General Maintenance Information; Periodic Checks and Warnings; Electric Arc Troubleshooting

ElectroVap RTH-V2
47
Pictures and values are not contractual - The devices may be subject to changes without notice
DRAIN FREQ.:
XXXX
DRAINING TYPE:
XXXX
CYCLE DRAIN
DURATION: XXXX
COOLING TYPE:
XXXXX
Allows to chose the drain logic (CYCLIC BASED or TIMED
BASED)
Setting of drain duration in seconds
Frequency of drain system
-with RTH et ERS: 1 < Freq. < 10.
-Avec RTHLC:
Cooling of the tank before service:
2 choices:
“ECO COOLING ” ( natural cooling, requires several hours
before being able to touch the tank)
“FAST COOLING” ( the temperature of the tank is reduced
by adding cold water, after few minutes, the service can be
done)
CHANGE UNIT TYPE:
RTH XX
HUMIDIFIER
CONFIGURATION
LANGUAGE: XXXX
CHANGE VOLTAGE:
X.XXX V
FRANCAIS / ENGLISH
RTH model (see range)
Selection of power heating ( 2x220, 2x230, 3x208,
3x220, 3x230, 3x380, 3x400, 3x415, 3x440, 3x460,
3x480, 3x575, 3x600, 3x690)
HUMIDIFIER STATUS
TOTAL GROUP
PROD.: XXKG
Adjusts the total production of the RTH group (Master /
Slave)