ElectroVap RTH-V2
48
Pictures and values are not contractual - The devices may be subject to changes without notice
CALIBRATION T° RIGHT:
XX %
SELF CHECKING
CALIBRATION CTRL
SIGNAL: XX %
CALIBRATION T° LEFT:
XX %
NETWORK UNIT ID: XX
CURRENT TIME:
XXXX/XX/XX XX/XX
MFGR TEST DATE:
XX/XXXX
COM. SPEED: XX bs
COM. PROTOCOL
Start up of self-checking system (“YES” or “NO”)
Calibration of control signal (-10% at +10%)
Calibration of the tank temperature sensor (-5% at
+5%). For the RTH 2 tanks: righ temperature.
Only for RTH with 2 tanks only: Calibration left
temperature (-5% at +5%).
Setting current time (optional battery)
“year/Month/day Hour/Minute”
Setting the date test
“Month, year”
Adress unit network 1 < ID < 254
Communication network speed
2400 < speed < 230400
Network connected : “MODBUS RTU” or “BACNET
MS/TP”
To Next Page
Loading...
