Replacing consumables
1
1-62 ineo 223/283/363/423
1.19
1.19 Replacing consumables
When it becomes necessary for consumables to be replaced or replenished, for example, the toner bottle is
empty or finisher staples have run out, a message prompting the user to replace or replenish consumables
is displayed on the touch panel.
If such a message appears, follow the appropriate procedure to replace consumables, or take the required
action.
When the toner is about to run out, the following message appears (If it is replaceable by the user.).
d Reference
For details on the replacement procedure, refer to page 1-64 of this manual.
Punch scrap box Toner bottle
Staple cartridge
To Next Page
Loading...