DEVI DEVIreg Touch - Page 11

The screen of the heating cable must be connected to
the earth conductor of the power supply cable by us-
ing a separate connector.
Note: Always install the oor sensor in a conduit in the
oor.
3. Mount and reassemble the thermostat.
▪
Fasten the thermostat to a wall bracket or
wall box by driving the screws through the holes
in each side of the thermostat.
▪
Put the frame on.
▪
PRESS the display module back in place
Important: Do NOT press on the display screen when
clicking the display module back in place.
DEVIreg™ Touch
Installation Guide 11