DEVI DEVIreg Touch - Initial Settings; Settings

Initially it is recommended to leave the thermostat connected
to the main supply for 15 hours to fully charge the battery.
The current time and day is then kept for 24 hours if mains
supply is o. All other settings are stored permanently.
3 Settings
3.1 Initial Settings
Initial settings must be specied when the unit is activated
for the rst time:
1. Use the arrows on the
right side of the screen to
go to your language, and
press to select it. Then
press
in the upper
right corner to conrm.
DEVIreg™ Touch
12 Installation Guide