1.2 Safety Instructions
before installation.
IMPORTANT: When the thermostat is used to control a
to determine suitable temperature settings (it is
restrictions.
Please also note the following:
▪
The installation of the thermostat must be done by
a licensed electrician according to local regulations.
▪
The thermostat must be connected to a power supply
via a suitably rated RCD/safety switch.
▪
Always connect the thermostat to continuous power
supply.
▪
Do not expose the thermostat to moisture, water, dust,
and excessive heat.
DEVIreg™ Touch
Installation Guide 7
To Next Page
Loading...
