Introduction 16
devolo Magic 2 LANtriple
3 Red LED Solid on Status 1:
The other network nodes are in standby mo-
de, so they cannot currently be accessed
over the electrical wiring. The PLC LEDs on
the other devolo Magic adapters flash white
only for a short time.
Status 2:
The connection to the other network nodes
has been interrupted. There may be electro-
magnetic or radio frequency interference on
the power line. In this case, put the
devolo Magic adapters closer to each other
or try to shut off the source of interference.
Can be disabled
4Red and
white
LED
Flashing at in-
tervals of 0.1
sec. red/2 sec.
white
Data transmission rate not in optimum
range **
Can be disabled
LED Behavior Meaning LED status display
(web interface*)
To Next Page
Loading...
