Devolo Magic 2 LAN triple User Manual

17 Introduction
devolo Magic 2 LAN triple
5White
LED
Status 1:
Flashing at
intervals of
0.5 sec.
(on/off)
Status 2:
Flashing at in-
tervals of 1
sec. (on/off)
Status 1:
This devolo Magic adapter is in pairing
mode and the system is searching for new
devolo Magic adapters.
Status 2:
Someone has triggered the "Identify device"
function on the web interface or in the
devolo Home Network App. This function
identifies the devolo Magic adapter being
searched for.
Cannot be disabled
6White
LED
Solid on The devolo Magic connection does not have
any issues and the devolo Magic adapter is
ready to operate.
Can be disabled
7White
LED
Flashing at in-
tervals of
0.1 sec.. on /
5sec. off
The devolo Magic adapter is in standby mo-
de.***
Can be disabled
8Red and
white
LED
Flashing at in-
tervals of
0.5 sec. red/
0.5 sec. white
The devolo Magic adapter is carrying out a
firmware upgrade.
Cannot be disabled
LED Behavior Meaning LED status display
(web interface*)

Devolo Magic 2 LAN triple Specifications

General

Type	Powerline Adapter
Maximum Data Transfer Rate	2400 Mbps
Ports	3x Gigabit Ethernet
Encryption	128-bit AES
Standard	HomePlug AV2
Model	Magic 2 LAN triple
Manufacturer	Devolo
Wi-Fi	No
Dimensions	152 x 76 x 40 mm
Weight	290 g
Operating Temperature	0°C to 40°C
Compatibility	Works with all Devolo Magic series adapters
Range	500 meters over powerline
Ethernet Speed	10/100/1000 Mbps
Plug Type	EU, UK, US (varies by region)
Operating Humidity	10% to 90% non-condensing