27 Configuration
devolo Magic 1 LAN
1-1
Protocol: Display indicating which address confi-
guration protocol is in use — SLAAC or DHCPv6.
Under IPv6 two dynamic address configurations
exist:
b StateLess Address AutoConfiguration (SLAAC)
b Stateful Address Configuration (DHCPv6)
The router (as gateway) specifies which of these
two proceedings is used. This is done using the M
bit in the Router Advertisement (RA) and means
"Managed address configuration".
b M-Bit=0: SLAAC
b M-Bit=1: DHCPv6
SLAAC address: global IPv6 address in use to ac-
cess the internet
DNS server: address of the name server in use to
decode a name (e.g. www.devolo.global)
You can find more detailed information on
the displayed network details in Chapter 4.4
LAN.
4.3 Powerline
In the Powerline area, you will find functions and
information on the topic of Powerline and adapter
pairing.
4.3.1Powerline network
In order to use a new devolo Magic 1 LAN in your
devolo Magic network, first you have to connect it
to your existing devolo Magic adapters devices as a
network. This is accomplished by using a shared
password. This can be assigned in different ways:
To Next Page
Loading...
