Devolo Magic - Configuration

33 Configuration
devolo Magic 1 LAN
1-1
Standby mode is enabled in the
devolo Magic 1 LAN factory default condition.
For information on the LED behaviour of the
devolo Magic adapter in standby mode, re-
fer to Chapter 2.3.1 Reading the indicator
light.
Time zone
Under Time zone, you can select the current time
zone, e.g. Europe/Berlin.
Time server
The Time server (NTP) option lets you specify a
time server. A time server is a server on the Internet
whose task consists of providing the exact time.
Most time servers are coupled with a radio clock.
Select your time zone and time server; the
devolo Magic 1 LAN automatically switches bet-
ween standard time and summer time.
4.5.3Configuration
Here you can restart the devolo Magic adapter
and/or reset it to the factory default settings.
Factory Settings
1 To remove a devolo Magic adapter from your
devolo Magic network and successfully restore
its entire configuration to the factory default
settings, click Factory reset.
2 Wait until the PLC LED flashes white and then
disconnect the devolo Magic adapter from the
mains supply.
Keep in mind that all settings that have al-
ready been made will be lost!