Name: Devolo Magic2 LAN DINrail
Brand: Devolo
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Configuration 34

devolo Magic 2 LANDINrail

To do so, enter the desired new password twice.

Now the web interface is protected against un-

authorised access with your custom password!

Identify Device

The devolo Magic adapter can be located using the

Identify device function. Click Identify to make

the white PLC LED for the corresponding adapter

flash for 2 minutes to make it easier to identify by

sight.

LED

Enable the LED disabled option if the LEDs on the

devolo Magic adapter are intended to be switched

off for normal operation. An error status is indica-

ted by corresponding flashing behaviour regard-

less of this setting.

Powersaving

If Powersave mode has been enabled, the

devolo Magic 2 LAN DINrail switches to Powersave

mode automatically whenever reduced data trans-

mission over ethernet is detected.

The latency (time for transmitting a data

packet) may be negatively affected.

Questions and Answers:

Need help?

Do you have a question about the Devolo Magic2 LAN DINrail and is the answer not in the manual?

Devolo Magic2 LAN DINrail Specifications

General