25 Initial use
devolo WiFi 6 Repeater 3000
Please select your Wi-Fi network from the list
and click Next.
If your Wi-Fi network does not appear in the
list, select a power socket closer to the WiFi
router/access point and refresh the list by
clicking on the arrow icon.
3 Enter the access data for your Wi-Fi network in
the Password field and click Next.
4 Now you can configure Wi-Fi settings.
Using default Wi-Fi settings
It is recommended that you use the default set-
tings. To do so, just click on Next.
Custom Wi-Fi settings
If you would like to configure custom settings, dis-
able the Use default Wi-Fi settings option.
The WiFi 6 Repeater 3000 supports two modes:
b Inband Repeating – forwards the WiFi signal
on the same frequency band on which it arrives
(2.4 GHz or 5 GHz).
WiFi_6_Repeater_3000.book Seite 25 Freitag, 3. Juni 2022 2:06 14
To Next Page
Loading...
