DeWalt DCG410VS - Page 14

ENGLISH
12
5" (125mm) Cutting Wheels
Type 1/41 guard**
Type A guard**
Backing flange
Diamond cutting
wheel
Locking flange
Wire Wheels
Type 27 guard
Type B guard
3–4" (76.2–100 mm)
wire cup brush
Wire Wheels
Type 27 guard
Type B guard
4" (100 mm)
wire wheel
5" (125mm) Sanding Discs
Rubber backing pad
Sanding disc
Clamp nut

Type 1/41 / Type A guards are intended for use with
Type 1/41 cutting wheels and Type27 wheels marked for
cutting only. Grinding with wheels other than Type27 and
Type 29require different accessory guards. Always use
the smallest proper guard possible that does not contact
theaccessory.
** NOTE: A Type1/41 / TypeA guard is available at extra
cost from your local dealer or authorized servicecenter.