DeWalt DCG410VS - Backing Flange; Guard; Battery Pack

11
ENGLISH
Register Online
Thank you for your purchase. Register your product nowfor:
• WARRANTY SERVICE: Registering your product will help
you obtain more efficient warranty service in case there is a
problem with yourproduct.
• CONFIRMATION OF OWNERSHIP: In case of an
insurance loss, such as fire, flood or theft, your registration of
ownership will serve as your proof ofpurchase.
• FOR YOUR SAFETY: Registering your product will allow
us to contact you in the unlikely event a safety notification is
required under the Federal Consumer SafetyAct.
Register online at www.dewalt.com/account-login.
Repairs
The charger and batteries are notserviceable. There are no
serviceable parts inside the charger or batterypack.

WARNING: To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (including brush
inspection and replacement, when applicable) should be
performed by a factory service center or an authorized service
center. Always use identical replacementparts.
5" (125mm) Grinding Wheels
Type 27 guard
Type B guard
Backing flange
Type 27
Depressed center
wheel
Locking flange
5" (125mm) Grinding Wheels
Type 27 guard
Type B guard
Type 27 hubbed
wheel
5" (125mm) Sanding Flap Discs
Type 27 guard
Type B guard
Backing flange
Non-hubbed sanding
flap disc
Locking flange
5" (125mm) Sanding Flap Discs
Type 27 guard
Type B guard
Hubbed sanding
flap disc
5" (125mm) Cutting Wheels
Type 1/41 guard**
Type A guard**
Backing flange
Type 27/42 depressed
center wheel,
cutting only
Locking flange
5" (125mm) Cutting Wheels
Type 1/41 guard**
Type A guard**
Backing flange
Type 1/41 abrasive
cutting wheel
Locking flange
ACCESSORIES CHART
Approved wheels for use with DCG411VS,
DCG410VS
Type 1 / T1 / 41 / T41
Type 27 / T27
Type 28 / T28
Type 29 / T29
Non-approved wheels for DCG411VS, DCG410VS
Type 11 / T11
Do Not Use
2. Remove the protective cover and insert the Tool
Connect™ Chip into the empty pocket
23
.
3. Ensure that the Tool Connect™ Chip is flush with the
housing. Secure it with the retaining screws and tighten
thescrews.
4. Refer to Tool Connect™ Chip Instruction Sheet for
furtherinstructions.
Three-Year Limited Warranty
For warranty terms, go to www.dewalt.com/support/
warranty.
To request a written copy of the warranty terms, contact:
Customer Service at DeWALT Industrial Tool Co., 701East
Joppa Road, Towson, MD 21286or call 1-800-4-DeWALT
(1-800-433-9258).
LATIN AMERICA: This warranty does not apply to products
sold in Latin America. For products sold in Latin America,
see country‑specific warranty information contained in
the packaging, call the local company or see website for
warrantyinformation.
FREE WARNING LABEL REPLACEMENT: If your warning
labels become illegible or are missing, call 1-800-4-DeWALT
(1-800-433-9258) for a freereplacement.