DeWalt DCS393 - User Manual

DCS391, DCS393
20V Max* 6-1/2" (165 mm) Cordless Circular Saw
Scie circulaire sans fil de 20 V max* 165 mm (6-1/2po.)
Sierra circular inalámbrica de 20 V Máx* 165 mm (6-1/2")
INSTRUCTION MANUAL
GUIDE D’UTILISATION
MANUAL DE INSTRUCCIONES
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE
GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE
USAR EL PRODUCTO.
If you have questions or comments, contact us.
Pour toute question ou tout commentaire, nous contacter.
Si tiene dudas o comentarios, contáctenos.
1-800-4-D
e
WALT • www.dewalt.com
Final Print Size: 8.5 x 5.5"

DeWalt DCS393 Specifications

General

Blade Diameter	6-1/2 inches
No Load Speed	5150 RPM
Bevel Capacity	50 degrees
Voltage	20V
Max. Cut Depth at 90°	2-1/4 inches
Power Source	Battery
Motor Type	Brushed
Max. Cut Depth at 45°	1-5/8 inches

Summary

General Power Tool Safety Warnings

Work Area Safety

Electrical Safety

Personal Safety

Measures for operator protection during tool use.

Saw Specific Safety Instructions

Safety Instructions for All Saws

Essential safety precautions for operating any saw.

Lower Guard Safety Instructions

Additional Specific Safety Instructions for Circular Saws

Battery and Charger Safety

Important Safety Instructions for Battery Packs

Safety instructions for battery packs, including Li-Ion.

Important Safety Instructions for Battery Chargers

Essential safety guidelines for operating battery chargers.

Tool Components and Operation

Changing Blades

Instructions for installing and replacing saw blades.

Cutting Techniques and Adjustments

Blade Selection and Kickback Prevention

Choosing correct blades and avoiding hazardous kickback.

Cutting Depth Adjustment

Bevel Angle Adjustment

Cutting Guides and Support