EasyManuals Logo

DeWalt DCST991 User Manual

DeWalt DCST991
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
ENGLISH
7
SAVE THESE INSTRUCTIONS FOR
FUTURE USE
COMPONENTS (FIG. A)
WARNING: Never modify the power
tool or any part of it. Damage or personal injury
couldresult.
Refer to Figure A at the beginning of this manual for a
complete list ofcomponents.
Intended Use
This string trimmer is designed for professional trimming
applications. DO NOT use under wet conditions or in
presence of flammable liquids orgases.
This string trimmer is a professional appliance. DO NOT
let children come into contact with the tool. Supervision is
required when inexperienced operators use thisappliance.
This is not an edger and is not intended to be used for
edging.
ADJUSTMENTS
WARNING: To reduce the risk of
serious personal injury, turn unit off and remove
the battery pack before making any adjustments
or removing/installing attachments or
accessories. An accidental start-up can causeinjury.
WARNING: Never remove the guard.
Damage or personal injury couldresult.
WARNING: NEVER OPERATE appliance
WITHOUT GUARD FIRMLY IN PLACE. The guard
must always be properly attached on the appliance to
protect theuser.
The trimmer comes fully assembled. The auxiliary handle
4
is positioned to maximize balance. However, if adjustment is
necessary, loosen the four bolts
13
with a hex wrench and
slide the auxiliary handle up or down the trimmer pole
6
as
shown in FigureC.
Fig. C
4
6
1313
OPERATION
WARNING: To reduce the risk of
serious personal injury, turn unit off and remove
the battery pack before making any adjustments
or removing/installing attachments or
accessories. An accidental start-up can causeinjury.
WARNING: Always use proper eye
protection that conforms to ANSI Z87.1 (CAN/CSA
Z94.3) while operating thisappliance.
Installing and Removing the Battery
Pack (Fig. D)
WARNING: Make certain the lock-off
lever is not engaged to prevent switch actuation
before removing or installingbattery.
NOTE: For best results, make sure your battery pack is
fullycharged.
To install the battery pack: Align the battery pack
10
with the rails inside the main housing and slide it into the
housing until the battery pack is firmly seated and ensure
that it does notdisengage.
To remove battery pack: Depress the release button
11
and firmly pull the battery pack out of the main housing.
Insert it into the charger as described in the charger section
of thismanual.
10
Fig. D
11
Proper Hand Position (Fig. E)
WARNING: To reduce the risk of serious
personal injury, ALWAYS use proper hand position
as shown.
WARNING: To reduce the risk of serious
personal injury, ALWAYS hold securely in anticipation
of a suddenreaction.
Proper hand position requires one hand on the primary
handle
12
and one hand on the auxiliary handle
4
.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DeWalt DCST991 and is the answer not in the manual?

DeWalt DCST991 Specifications

General IconGeneral
BrandDeWalt
ModelDCST991
CategoryTrimmer
LanguageEnglish

Related product manuals