8514-296-001 REV A page 45
programmed, the customer will be prompted to add additional coins if they wish
to purchase the “Extra Rinse” feature. This prompt will occur during the standard
“Final Rinse” bath. If the customer does not meet the vend price of the “Extra
Rinse” feature, the prompt will time out and the “Extra Rinse” bath will not occur.
4. “SuperWash” – If the user programs SuperWash to “On”, the feature becomes
active. However, the customer will not be prompted to pay an additional vend
price for “SuperWash” unless the user programs the Price to a value other than 0
(“Free”). With the “SuperWash” feature active, any combination of the “Pre-
Wash”, “Extend Wash”, or “Extra Rinse” features, of which that are also active,
will be automatically implemented during the cycle. No additional prompting for
vend will occur for the individual features during the cycle. For example, if “Pre-
Wash”, “Extra Rinse”, and “SuperWash” options are active and “SuperWash”
price is met, the “Pre-Wash” and “Extra Rinse” features will automatically occur
during the cycle. The control will not prompt for “Extra Rinse” vend at the normal
prompting time of the cycle.
With the “SuperWash” feature active and “Price” value programmed, the
customer will be prompted to add additional coins if they wish to purchase the
“SuperWash” feature. This will occur after they have entered coins to meet the
Base Vend price. If the customer does not meet the “SuperWash” vend price, the
prompt will time out and the configured combination of “Pre-Wash”, “Extend
Wash”, or “Extra Rinse” features that make up SuperWash will not occur. The
“SuperWash” price will take priority over the individual pricing of the “Pre-Wash”,
“Extend Wash”, and “Extra Rinse” features that are active.
To Next Page
Loading...
Need help?
General
