8514-219-001 REV E PAGE 29
EC DECLARATION OF CONFORMITY
WITH COUNCIL DIRECTIVE 2006/42/EC
Directive: Machinery Directive on machinery safety, 2006/42/EC
Conforming
Machinery:
Industrial Drying System
Model Numbers: DN30X2E, DN0030E, DN0050E, DN0080E, DNS030E
Serial Numbers:
Manufacturer: Dexter Laundry, Inc.
2211 West Grimes Avenue
Fairfield, IA 52556 USA
Harmonised
Standards
Referenced
or Applied:
EN ISO 12100:2010 Safety of machinery. General principles for
design. Risk assessment and risk reduction.
EN 349:1993+A1:2008 Safety of machinery. Minimum gaps to avoid
crushing of parts of the human body.
EN 614-1:2006+A1:2009 Safety of machinery. Ergonomic design
principles. Terminology and general principles.
EN 953:1997+A1:2009 Safety of machinery. Guards. General
requirements for the design and construction of
fixed and movable guards.
EN 1037:1995+A1:2008 Safety of machinery. Prevention of unexpected
start-up.
EN ISO 13857:2008 Safety of machinery. Safety distances to
prevent hazard zones being reached by upper
and lower limbs.
EN ISO 14119:2013 Safety of Machinery. Interlocking devices
associated with guards. Principles for design
and selection.
EN ISO 10472-1:2008 Safety requirements for industrial laundry
machinery. Common requirements.
EN ISO 10472-4:2008 Safety requirements for industrial laundry
machinery. Air Dryers.
EN 60335-1:2012/AC:2014 Safety of machinery. Electrical equipment of
machines. General requirements.
Specifications with which Conformity is
Declared:
Essential Health and Safety Requirements of
Annex1 of the Machinery Directive
We hereby certify that the machinery described above conforms with the essential health
and safety requirements of Council Directive 2006/42/EC on the approximation of the laws
of the Member States relating to the safety of machinery.
Date:
Signed:
Signatory: Mark Cox
Director of Engineering
To Next Page
Loading...
Need help?
General
