8514-272-001 REV C page 14
When manual programming mode is entered, the “Start”, “High”, “Medium” and “Low” buttons perform alternate
functions.
Button Name Alternate Function in Programming Mode
Start
Becomes the action to accept the displayed option or the “Enter”
key
High
Becomes the action to move UP through displayed options (Press
& hold for accelerated scrolling)
Medium
Becomes the action to move DOWN through displayed options
(Press & hold for accelerated scrolling)
Low
Becomes the action to move back a step (1 press) or EXIT from
programming mode (press for 3 seconds)
These alternate functions allow the user to move through a menu of options to choose various programmable
settings. The figure below shows the top level menu. Choosing an option from the top level menu will then
display the next level of options (the sub menu).
To Next Page
Loading...
