8514-272-001 REV C page 3
SPECIFICATIONS
50 lb. Commercial Dryer: T-50 SWD Reversing Tumbler
DCS050NC-11EC1R (60 Hz), DCS050NC-39AC1R (50 Hz)
Cabinet Height 41” 1041 mm.
(Assumes minimum leveling leg adjustment)
Cabinet Width 34 1/2” 876 mm.
Cabinet Depth 54 3/4” 1391 mm.
Floor to Bottom of Door 7 3/4” 196 mm.
Door Opening 25 5/8” 651 mm.
Dry Wt. Capacity 50 lbs. 22.7 kg.
Cylinder Diameter 32 1/2” 825 mm.
Cylinder Depth 33” 838 mm.
Cylinder Volume 15.8 cu. ft. 447.4 liters
Lint Screen Area 544 sq. in. 3510 sq. cm.
Gas Input (60 hz) 108,000 Btu/hr 31.7 kW
Gas Input (50 hz) 96,000 Btu/hr 28.3 kW
Gas Supply Connection 1/2” 12.7 mm.
Natural Burner Manifold
(60 hz Water Column) 3.5” 88.9 mm
(50 hz Water Column) 3.5” 88.9 mm
L.P. Supply (Water Column) 11.5- 13.5” 292 mm- 343 mm
L.P. Burner Manifold Pressure
(60 hz Water Column) 11” 279 mm
(50 hz Water Column) 11” 279 mm
Exhaust Size 8” 203 mm.
Make-up Air 1 sq. ft. 929 sq. cm.
Example: 1.5 sq. ft = 1.5 ft. long X 1 ft. wide
Motor Size-Tumbler (50 or 60 Hz) 1 H.P. .746 kW
Motor Size-Blower (50 or 60 Hz) 1/2 H.P. .373 kW
Airflow (60 hz) 650 CFM 18.4 m^3/min
Airflow (50 hz) 510 CFM 14.4 m^3/min
Electrical Specifications – 208-240/60/1
Voltage/Hz/Phase 208-240V/60Hz/1Phase
Running Amps 10
Circuit Protection Amps 15
Wire Size 12 gauge
Electrical Service 2 wire + ground
Electrical Specifications – 220-240/50/1
Voltage/Hz/Phase 220-240V/50Hz/1Phase
Running Amps 10
Circuit Protection Amps 15
Wire Size 3.5 mm2
Electrical Service 2 wire + ground
Shipping Weight 540 lbs. 245 kg.
Net Weight 500 lbs. 227 kg.
Clearance Behind Machines (min.) 18” 457 mm.
To Next Page
Loading...
