Dexter Laundry T-900 User Manual (English)

Other manuals for Dexter Laundry T-900

Operators Manual Installation & Operation Instructions340 pages

Parts & Service Manual77 pages

Service Manual116 pages

Operator's Manual68 pages

Questions and Answers:

B
Brooke YoungAug 29, 2025
Why water does not flush softener compartment of Dexter Laundry T-900 Washer?
- M
  Michael SextonAug 29, 2025
  If water does not flush the softener compartment of your Dexter Laundry Washer, check to ensure that the water valve is operating. If not, check for 120VAC to the water valve from the Input/Output PCB. If there is 120VAC, change the water valve. If there is no voltage check the Input/Output PCB. Also, check all screens for obstructions and clean them. Ensure that the water is turned on and operating.
J
Justin GeorgeAug 28, 2025
What causes water comes in but level does not rise in Dexter Laundry T-900?
- C
  cruzmatthewAug 28, 2025
  If water comes into your Dexter Laundry Washer but the level does not rise, check the drain valve for blockage and the drain valve motor and gear train. If there is power but the drain valve does not close, replace the valve. Check for power to the drain valve; if there's no power, check the (brown/yellow) circuit for power. Also, check or replace the water valve diaphragms.
J
James NicholsAug 27, 2025
What causes excessive vibration in Dexter Laundry T-900 Washer?
- E
  Eric RichardsonAug 27, 2025
  If your Dexter Laundry Washer experiences excessive vibration, check the strength of the mounting structure, concrete, or base, and ensure the mounting bolts are tightened. A worn drive belt or damaged pulleys can also cause vibration and noise, so inspect these components. Be sure you wash recommended load size as specified for washer model (in lb/kg). Small loads contribute to out of balance loading and increase vibration.