NOTE:
Use properly insulated tools to prevent accident tale electric shock or short circuits.
If insulated tools are not available, cover the entire exposed metal surfaces of the available
tools, except their tips, with electrical tape.
4.3 Safety Gear
It is recommended to wear the following safety gear when dealing with the battery pack.
5 Mounting instructions
5.1 Installation Precaution
Lithium battery is designed for indoor use. Please avoid direct sunlight, rain exposure, snow
laying up during installation and operation.
Please make sure the installation site meets below conditions:
Not in direct sunlight.
Not in areas where highly flammable materials are stored.
Not in potential explosive areas.
Not in the cool air directly.
Not higher than altitude of about 2000 meters above sea level.
Not in environment of precipitation or humidity (>95%).
5.2 Installation Location
Make sure that the installation location meets the following conditions:
Indoor installation.
The area is completely water proof.
The wall is flat and level.
There are no flammable or explosive materials.
The ambient temperature is within the range from -20°C to 50°C.
The temperature and humidity are maintained at a constant level.
There is minimal dust and dirt in the area.
The distance from heat source is more than 2 meters.
The distance from air outlet of inverter is more than 0.5 meters.
Do not cover or wrap the battery case or cabinet.
Do not place at a children or pet touchable area.
To Next Page
Loading...
Need help?
General
