5.7 Visual Inspection of the Connection
After connecting the battery, check for:
Usage of positive and negative cables.
Connection of the positive and negative terminals.
All the bolts are tightened.
Cables fixation and the appearance.
The installation of the protecting cover.
5.8 System startup and shutdown
Power on steps：
After installation, wiring, and configuration, you must check all connections. When the
connection is correct.
①After the inverter is connected to the battery pack in the off state, turn on the inverter
first.When the screen lights up, turn on the battery pack circuit breaker(
"OFF" to the "ON"
).
②Press the switch button.
③When the LED is fully lit, the power is successfully powered on.
To Next Page
Loading...
