- 24 -
3211/V1/0110
3.3 Technical specifications
Model
Dimensions and weight
Overall length 458 mm
Wheelbase 335 mm
Width front/rear 305 mm
Tread width front/rear 255 mm / 260 mm
Height 165 mm
Ground clearance 30 mm
Weight with/without NiMH
rechargeable drive battery 3020 g / 2600 g
Motor
brushless electric motor, pre-installed
Operating voltage 2 x 7,4 V
KV (revolutions/V) 2230
Power 1105 W
No-load current 2.0 A
Length 65 mm
Di
ameter 36 mm
Weight 310 g
Length of the motor shaft 80 mm
Shaft diameter Ø 5 mm
Power transmission
All-wheel drive, 3 differentials
All driving axles ball-bearing-mounted
Chassis frame
Front-wheel suspension Double-wishbone suspension,
tensioning screw in the upper wishbone
rear-wheel suspension: Double-wishbone suspension
Tensioning screw in the upper wishbone
Track rods: Tensioning screw in the right and left track rod parts
Chassis
Twin-deck chassis made of anodised aluminium
extremely light, strong and torsion-resistant
Upper deck made of anodized Aluminium
Shock absorber bridge made of fibre-reinforced plastic
Raised plastic shells on the sides
Suspension
Flat coil springs with aluminium oil-pressure shock absorbers
Spring preload adjustable by means of threaded rings,
Variable articulation points
Tyres
Front/rear: High-grip multi-spike tyres with filler strips
Glued to the wheel rim
Ø 110 mm, width 45 mm
Speed controller KL-80
Continuous current 80 A
Peak current 380 A
Resistance 0.0006 ohm
Dimensions (without fan) (LxWxH) 58 x 46.5 x 35 mm
Weight 105 g (without cables)
Servo RS 90 MGBB
Features Metal gears, two ball bearings
Operating voltage 6 V
Actuating speed (sec/60°) 0.16 s
Actuating torque 9.0 kg/cm (88.3 Ncm)
Weight 56 g
Dimensions (LxWxH) 41.3 x 20.3 x 38.7 mm
To Next Page
Loading...