DFI CP100-NRM - DVI-I Port

36
2
Hardware Installation
DVI-I Port
DVI-I
The DVI-Iport is used to connect an LCDmonitor. This portsupports DVI-Dsig-
nalonly.
Connectthedisplaydevice’scableconnectortotheDVI-Iport.Afteryouplugthe
cableconnectorintotheport,gentlytightenthecablescrewstoholdtheconnec-
torinplace.
BIOS Setting
CongurethedisplaydeviceintheAdvancedmenuoftheBIOS.Refertochapter
3formoreinformation.