3
Automotive Circuit Probe & Breaker Finder Kit
⑨ Red Positive Wire - Used to deliver current.
⑩ Loudspeaker - Ale prompt.
⑪ Tool Kit Working Mode Switch - Switch between Circuit Probe(I) and Breaker Finder(II)
working modes.
⑫ Antenna - Receive Data.
⑬ Buzzer - Sound prompt.
⑭ Sensitivity Controller - Control sensitivity.
⑮ Test Button- Press the test button to sta testing.
⑯ Headphone Po - Po for external headphone.
The circuit probe is the best electrical tester for reducing diagnostic time in all 6 to 30-volt
vehicle electrical systems. After a simple hook-up of the tool to the vehicle's batte, you
can:
◆ Determine at a glance if a circuit is positive, negative, or open without having to
reconnect clips from one batte pole to another.
◆ Test for continuity with its built-in auxilia ground lead.
◆ By depressing the power switch, conduct a positive or negative batte current to the
probe tip for testing the function of an electrical component without the use of jumper
wires.
◆ Test for poor ground contacts instantly without peorming voltage drop tests. The tool
is also sho circuit protected; its internal circuit breaker will trip if it becomes overloaded.
◆ Follow and locate sho circuits without wasting fuses. The tool's long cable allows you
to test along the entire length of the vehicle without constantly searching for suitable
vehicle grounds.
2.3 Pas List
2.4 General Description
2.4.1 Circuit Probe
DescriptionPa Qty
User’s Manual1 1
Cigarette lighter adapter2 1
Batte hookup clips3 1
Probe tip4 1
Extension cable(20ft.)5 1
Rugged blow molded case6 1
Power assist cable7 1
Breaker Finder8 1
To Next Page
Loading...