Dibal D-900 - Manual Zero; Set Item; Tare Operations; Open Market Price and Special Offer Price

Basic Manual D900 OPERATING PROCEDURE
5
2
2
.
.
2
2
.
.
Enter the price and press .Record the operation in the corresponding cashier.
If you wish to add or subtract more than one unit before recording, enter the number of products and press x.
3. Record the operation in the corresponding cashier.
4.6. Manual zero
Press to reset the weight to zero.
4.7. Set item
Operations with the same item, configured, User Menu Settings  Configuration of keyboard  Set Price
.
1. Place the item you are going to work with on the tray.
2. Select the item to be preset.
3. Press the Preset Item key in order to set the price.
4. To disable the fixed price, press the C key or select another item.
4.8. Tare operations
Tare associated with each PLU, programmable or manual tare.
The TARE ASSOCIATED WITH EACH PLU is programmed in the tare field when creating or modifying the
PLU’s.
To work with PROGRAMMABLE TARES , place the product to be weighed, select one of the
programmable tares and record the weight.
To do a MANUAL TARE:
1. Place the weight to be tared on the tray.
2. Press the Tare key, .
3. To cancel the tare setting, empty the tray and press Tare, .
4.9. Open market price and special offer price
FREE THE PRICE
1. The item must have the Alter Price function enabled. User Menu  Items  Others Tab  Alt. Pri.
(Alter Price)
2. Long press on the PLU key. Enter the new price and operate normally with the product.
SPECIAL OFFER PRICE:
1. Make sure that the special offer price is recorded in the PLU you are going to use.
2. Select the item and press Special Offer Price
3. If you wish to sell in Receipt mode , change the working mode.
4.10. Weight return
Returning a product that has already been weighed and the corresponding sum accumulated, User Menu
Settings  Configuration of keyboard  Weight return , take the following steps:
1. Place the item on the tray again.
2. Select the corresponding PLU.
3. Press the Return key .
4. Press the key of the corresponding cashier.
4.11. Quick Change PLU Price
The different PLUs available can be viewed on the display. The User Menu Settings  Configuration of
keyboard  Allow free price option must be enabled. To do so, press the PLU for a few seconds
4.12. Receipt mode
4.12.1.Programming a Receipt
There are fixed formats, 0 and 1, for the receipt as well as programmable formats 2 and 3. The 15
associated header lines can be programmed in all of them.
1. Select the format to edit. User Menu Receipt Receipt Headers  Format X (X=0…3).
To design the aspect: For example: