6.5.3.Table of texts Programming [ 4 5 2 ]
The following keys are useful in programming the table of text:
X
Change field and record
C
Delete the character that is being edited.
+
++
+
Move the cursor forwards.
−
−−
−
Move the cursor backwards.
◊
◊◊
◊
Delete a previously recorded product. The scales will
request confirmation. If you wish to delete it press ∗
∗∗
∗, again,
and if you do not wish to delete it, press C.
PRINT
Print programmed texts
∗
∗∗
∗
Record product set-up.
The text table is defined below, and it also can be used as a
legend to define the article characteristics.
1. From the Traceability programming position, MENU (2
seconds) 4 5 2
2. Enter the class (1-2*), for example, press 1 and press X
3. To pass from line of text (questions) press the key F2
4. Enter the number of line that we want to define with the
keypad. For example, press 1 to define the first line and then
press X
5. Write the text (SLAUGHTERING HOUSE NUMBER,
COUNTRY OF SLAUGHTER, QUARTERING NUMBER,
Country, DATE OF PRODUCTION …) Move through the text
by pressing +
++
+ and −
−−
−. The press the key X to recorded and
move to the next text of line.
6. To exit and record press
∗
∗∗
∗
7. Press the key PRINT in order to print the entered lines of text.
Some caracters as for example :
&, :,´,`,¨,
etc they won’t be
visualize in display (alphanumeric) although it will be
printed.
N. Identification: It is a compulsory field and it is given by
default, that is why there is no need to create.
To Next Page
Loading...
Need help?
General
