<Article name>
2.3. HOW TO OPERATE THE SCALES
DIBAL 500 Range weighing scale are specially designed to
simplify the sales assistant’s work, ensuring a high level of
speed and reliability on the part of the system, whether the latter
is one set of weighing scales or a network of MASTERS and
SLAVES connected to a PC.
The starting point of all explanations is the work status when the
weight, prince and amount is 0.
2.3.1.Direct price
The direct price must be activated in order to enter a price
with the number keys. To do this:
1. Check that the scales have been set up correctly. (See Sect..
5.1.2.4, DIRECT PRICE)
2. Press F4 until the words DIRECT PRICE appear on the
display.
3. Thus, when a weight is placed on the platform, the number
keys can be used to enter the price.
4. To deactivate the direct price, simply press F4 until DIRECT
PRICE disappears from the display.
2.3.2.Normal weight
In order to weigh a product, proceed as follows:
1. Place the product to be weighed on the platform.
2. Enter the price using one of the following methods:
-Directly with the number keys and then by pressing the
corresponding memory key. To do this the DIRECT PRICE
must be activated. (See 5.1.2.4. DIRECT PRICE)
-By entering the article code (check that it is in the
corresponding department and be careful to enter all the
digits in the code: code 212 is not the same as 000212!!).
To do this the DIRECT PRICE must be deactivated. (See
sect . 5.1.2.4 DIRECT PRICE)
-Press the corresponding direct key (check that it is in the
corresponding department of the corresponding PLU).
In the event of an error, press C to set the price to zero.
3. If you wish to see the price and amount in the secondary
currency, press keys SHIFT and F3.