To Next PageTo Next Page
Need help?Do you have a question about the Dickey-John mini GAC and is the answer not in the manual?
General| Model | mini GAC |
|---|---|
| Display | LCD |
| Power Supply | 9V battery |
| Temperature Range | 32-122°F (0-50°C) |
| Operating Temperature | 32-122°F (0-50°C) |
| Accuracy | +/- 0.5% |
| Repeatability | ±0.2% |
| Grain Types | Over 450 grains |
Describes the key components and capabilities of the mini GAC tester.
Details the operating temperature, humidity, weight, and power source of the unit.
Instructions on how to store the unit's loading cup and main body.
Information on battery type, low battery warnings, and dead battery indicators.
Explanation of the functions of the ON/OFF/HOME, ENTER, and UP/DOWN arrow buttons.
Step-by-step guide to selecting the correct grain type for testing.
Instructions for performing a grain sample test, including empty and fill cell procedures.
How to change the device language and supported languages.
How to configure whether test weight and temperature results are shown or hidden.
How to manage stored averages, including setting memory buffer size.
Instructions to turn the display backlighting on or off to save battery.
How to adjust the display contrast level for better visibility.
How to change measurement units between English (Lbs/Bu) and Metric (Kg/HL).
How to set the automatic power-off duration to conserve battery life.
Conditions and preparation steps for accurate moisture measurement.
Procedure to select a new grain type for testing and how the list is saved.
Detailed steps for conducting a grain test, including sample loading and test initiation.
Explanation of the auto-ranging feature for out-of-limit grain tests.
How to add, read, or clear test results for averaging.
How to adjust moisture or test weight bias for calibration differences.
How to view the last 10 test grain result readings.
Tips for dealing with condensation in the cell to ensure accurate readings.
Techniques for pouring high moisture grains into the cell without sticking.
Best practices for achieving the most accurate test results.
Warning when battery voltage is low but still functional.
Warning indicating the battery is depleted and unit will not operate.
Indicates measured temperature is below the minimum operating threshold.
Indicates measured temperature is above the maximum operating threshold.
Indicates measured moisture is below the production calibration limit.
Indicates measured moisture is above the production calibration limit.
Indicates the mass during empty cell test exceeds the limit.
Indicates the measured average tilt angle exceeds the acceptable limit.
Provides system details like software version, unit name, and contact info.
