To Next PageTo Next PageWhat to do if the DieHard 28.71239 Battery Charger won't turn on?
If your DieHard Battery Charger isn't turning on, there might be a few reasons. First, the AC outlet could be dead; check the fuse or circuit breaker. Second, there could be a poor electrical connection; examine the power cord and any extension cords for loose plugs.
Why does my DieHard 28.71239 show 'CHARGE ABORTED- BAD BATTERY'?
If your DieHard Battery Charger displays 'CHARGE ABORTED- BAD BATTERY' and the green LED is flashing, it could be due to a couple of reasons. One possibility is that the battery is sulfated; try resetting the charger by briefly unplugging it. Another reason might be that the battery is too large for the charger; in this case, you would need a charger with a higher amp rate.
General| Brand | DieHard |
|---|---|
| Model | 28.71239 |
| Category | Battery Charger |
| Language | English |
Warning about explosive gases generated by lead-acid batteries during operation.
Product contains chemicals known to cause cancer and reproductive harm.
Covers warnings like keeping out of reach of children, using correct battery types, and handling the charger safely.
Precautions against smoking, sparks, rain, frozen batteries, and touching energized clips.
Guidelines for using extension cords, including wire size recommendations.
Identifies key parts of the DieHard charger, such as AC power cord, display, and connectors.
Explains the digital display functions and the display/on button for viewing voltage and charge progress.
Describes the meaning of solid, pulsing, and flashing green LEDs for charging status.
Step-by-step guide for connecting and charging a battery while it is installed in a vehicle.
Instructions for charging a battery removed from the vehicle in a well-ventilated area.
Explains how to connect the charger using various quick-connect cable assemblies.
Details on using battery clamp, ring terminal, and 12V accessory plug quick-connects for charging.
Information on automatic charging mode, desulfation, and battery connection status indicators.
Describes the transition to maintaining mode after full charge and potential issues.
Explains desulfation mode for sulfated batteries and reasons for aborted charging.
Lists and explains various messages displayed by the charger, like "CONNECT CLAMPS" and "CHARGE ABORTED".
Instructions for cleaning the charger and clamps, and proper storage to prevent damage.
