• 11 •
12. MAINTENANCE AND CARE
A minimal amount of care can keep your battery charger working properly for years.
• Clean the clamps each time you are nished charging. Wipe off any battery uid
that may have come in contact with the clamps, to prevent corrosion.
• Occasionally cleaning the case of the charger with a soft cloth will keep the
nish shiny and help prevent corrosion.
• Coil the input and output cords neatly when storing the charger. This will help
prevent accidental damage to the cords and charger.
• Store the charger unplugged from the AC power outlet, in an upright position.
• Store inside, in a cool, dry place. Do not store the clamps on the handle,
clipped together, on or around metal, or clipped to the cables.
13. TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
The green LED
does not pulse
when charger
is properly
connected.
AC outlet is dead.
Poor electrical connection.
Check for open fuse or circuit
breaker supplying AC outlet.
Check for a loose tting plug
or extension cord.
The red LED is lit. Reversed clamps. Unplug the charger and reverse
the clamps.
14. BEFORE RETURNING FOR REPAIRS
When an UNKNOWN OPERATING PROBLEM arises, please read the
complete manual and call the customer service number for information.
This will usually eliminate the need for return.
If the above solutions do not eliminate the problem, or for information
about troubleshooting, call toll-free from anywhere in the U.S.A.:
1-800-621-5485.
15. REPLACEMENT PARTS
Battery clamps (quick-connect) ................................................2299003135Z
To Next Page
Loading...
