To Next Page

To Previous Page

Command descriptions set permissions

ConnectPort® LTS Command Reference

Permissions for the “kill” command. (See "kill")

newpass={none|rw-self|rw}

Permissions for the “newpass” command. (See "newpass")

none

The command cannot be executed.

rw-self

The user can set their own password.

The user can set any user’s password.

ping={none|execute}

Permissions for the “ping” command. (See "ping")

python={none|execute}

Permissions for the “python” command. (See "python")

reconnect={none|execute}

Permissions for the “reconnect” command. (See "reconnect")

revert-all={none|execute}

Permissions for the “revert all” command. (See "revert".) Individual “revert” commands are governed

by the permissions for that particular command, but “revert all” uses a different mechanism that

bypasses the individual commands.

rlogin={none|execute}

Permissions for the “rlogin” command. (See "rlogin")

status={none|read|rw}

Permissions for the “status” command. (See "status")

telnet={none|execute}

Permissions for the “telnet,” “mode,” and “send” commands. (See "telnet")

webui={none|execute}

Permissions for access to the Web user interface for the device.

none

The user cannot use the Web user interface.

execute

The user can access the Web user interface.

who={none|execute}

Permissions for the “who” command. (See "who")

s-alarm={none|read|rw}

Permissions for the “set alarm” command. (See "set alarm")

s-autoconnect={none|r-self|read|rw-self|w-self-r|rw}

Permissions for the “set autoconnect” command. (See "set autoconnect")

s-group={none|read|rw}

Digi ConnectPort LTS 8 Command Reference

Other manuals for Digi ConnectPort LTS 8